Tuesday 23 May 2017

DERANCOURT

Tools and safety equipment for the installation of energy and telecommunication networks

Accès direct à une rubrique

Information

ENERGIES fair - Lyon

ENERGIES fair - Lyon

20, 21 sept. 2017

More + >

Our brochure

View our online brochure
Download catalogue

New Products

Torque screwdriver with fixed torque pre-set in the factory for tightening limited to a torque of 4,72 Nm.

4,5 to 5 Nm (4,72 ± 6%) torque screwdriver for 4mm socket hex screw terminals for new connection circuit breakers.

 

Use:

  • Straight position for initial tightening
  • Angled position (or straight) for torque tightening
When the torque of 4,72Nm is reached, the torque device triggers and resets
automatically.
Impossibility of exceeding this torque.
Possibility of using the tool for loosening (Max 12 Nm).
 
Removable blades
 
Characteristics:
 
Glass fibre reinforced polyamide 6 tool.
Compliant with the insulated tools standard 1000V - NF EN CEI 60900.
Compliant with the NF EN ISO 6789 standard for manually controlled
torque wrenches - type II class E release tool,
allowable deviation ±6% (4.72Nm ±6%).
Supplied with torque verification certificate.
Serial no. for traceability and verification
 
The TD4 product includes 1 4,72Nm torque screwdriver + a short blade size 4 hex socket, reference L6P4C

> View the product

Knife for TPC cable protection tubes with retractable blade

Knife designed for cutting and opening ribbed cable protection tubes with
a diameter of 200mm max. It can also be used on smooth cable protection tubes.
With this knife, no more risk of damaging cables (electric arc) or cable sheaths inside
the protection tubes. It helps prevent cutting the cables, thanks to its short
double-edged blade with a protective blunt buttoned tip.
This tool is recommended by ENEDIS (ERDF) and
OPPBTP (safety datasheet G2F 01 14).
DERANCOURT patented design.

 

Characteristics:

  • triangular double-edged blade
  • protect blunt "buttoned" tip.
  • ergonomic handle, in PA6 loaded with glass fiber, in a rectangular shape to facilitate guidance
  • Retractable blade that can be set from 0 to 20 mm thanks to the adjustment wheel at the end of the handle.
  • insulated tool 1000V - NF EN IEC 60900

Notes: operations on cable protection tubes are not live working operations.

When not in use, the blade is fully retracted inside of the handle, thus both

preventing any cutting injuries and protecting the blade from any shocks.

  • interchangeable blade block
  • Supplied without belt pouch

Accessories:
Interchangeable blade block Ref: LCTPCR
Belt pouch alone Ref: ECTPC

> View the product

Insulated composite stripping pliers type A Ø 10 to Ø 45 MM

3 circular cutting blades – 1 longitudinal blade


PBT IS: insulated composite stripping pliers.
XX: circular cutting depth expressed in 10th of a mm, to be confirmed upon order.
YY: longitudinal cutting depth expressed in 10th of a mm, to be confirmed upon order.
A: type.

Example: PBT IS 12 16 A = insulated composite stripping pliers, type A, with a 1.2 mm circular cut and a 1.6 mm longitudinal cut.


Specifications:
Pliers made of insulating material with high mechanical properties.
Complies with IEC EN 60900 1000 V.
HSS steel blades.
Three blades for circular cut, one of which is supported by links, enabling a 120° automatic positioning.
One blade for longitudinal cut.

Use
Circular and longitudinal cutting
Remove a cable's outside sheath.

Capacities
For cables from 10 à 45 mm.
Cutting depth: to be calculated according to the thickness of the external sheath
 

Field of application
Examples: External high-voltage 35 to 150 mm² cable sheath - all materials.
External sheathing of underground low-voltage cable


Notes: The user can set up the pliers for either a right-handed or left-handed use. Possibility to substitute the longitudinal cutting wheel with another one according to the thickness of the cable sheath. We recommend the circular cut be less deep than the longitudinal cut.
 

Other available blade depths from 0 to 5 mm

> View the product

Insulated brush for battery terminals

Use:
Clean battery terminals in substations.
 
Just one swift circular move does the job.
Minimizes risks of short-circuit, saves you time.
 
Features:
Removable wire brush, diameter 50mm, mounted on a handle made of insulating material.
Dimensions: 115mm x Ø 60 mm
Weight: 365 g
Suitable for LV live working.
Complies with IEC EN 60900 1000V.
 
Spare part:
Wire brush and its attachment ref.: BC50

> View the product

Composite insulated cutting pliers for steel strip

Designed for clean and accurate cutting of metal screens on underground LV cables with synthetic insulation (e.g.: cable NFC 33-210).

Suitable for LV live working.
Complies with IEC EN 60900 1000V.
Complies with SERECT datasheet FT BT 506.

Features:

  • Composite insulated pliers made of insulting material with high mechanical and insulating properties.
  • Comfortable ergonomic handle thanks to the soft touch overmoulding.
  • Blades made of 60HRC treated steel.
  • Bottom blade with a flat heel and round tip enabling to easily slide between steel strips without risks of damaging the cables insulation.
  • Blades offset from the handles thus enabling a progressive cut when the heel is flat on the cable, and leaving enough space for the hand.
  • Top blade with a slit to fold back tongues of metal strip.
  • Integrated release spring to ease handling, and locking system to keep the pliers closed when not in use.

> View the product

Toolkit for the installation of LINKY smart meters

Safety tools and equipment for the installation of LINKY smart meters
 
 
 
 
 
 
 
 
See catalogue: CATALOGUE LINKY

> View the product

Composite insulated fuse extracting pliers

Pliers made of high mechanical strength insulating material

For fuses from 20 to 94mm

 

 

2 adjustable positions depending on the use:

 

Retracted position

Min. opening:   

30mm (flat ribbed jaws)

20mm (rounded jaws)

 

Extended position

Max. opening:  

94mm (flat ribbed jaws)

87mm (rounded jaws)

 

2 profiles available depending on the use (flat ribbed or rounded jaws)

 

Pair of jaw pads Ref. MDA30IS

> View the product

Insulated composite stripping pliers type B Ø 20 to Ø 60 MM

4 circular cutting blades – 1 longitudinal blade


PBT IS: insulated composite stripping pliers.
XX: circular cutting depth expressed in 10th of a mm, to be confirmed upon order.
YY: longitudinal cutting depth expressed in 10th of a mm, to be confirmed upon order.
B: type.

Example: PBT IS 28 32 B = insulated composite stripping pliers, type B, with a .2.8 mm circular cut and a 3.2 mm longitudinal cut.


Specifications:
Pliers made of insulating material with high mechanical properties.
Complies with IEC EN 60900 1000 V.
HSS steel blades.
Four blades for circular cut, two of which are mounted on toggle joints for an optimum automatic positioning.
One blade for longitudinal cut.

Use
Circular and longitudinal cutting.
Remove a cable's outside sheath.

Capacities
For cables from 20 to 60 mm.
Cutting depth: to be calculated according to the thickness of the external sheath.
 

Field of application
Examples: External high-voltage 35 to 240 mm² cable sheath - all materials.
External sheathing of underground low-voltage cable.
 

Notes: The user can set up the pliers for either a right-handed or left-handed use. Possibility to substitute the longitudinal cutting wheel with another one according to the thickness of the cable sheath. We recommend the circular cut be less deep than the longitudinal cut.

Other available blade depths from 0 to 5 mm.
 

> View the product

Contact us

Our company

Presentation
News
Insulated tools 1000V NF EN CEI 60900 - Insulated / insulating assembly tools
Sheath stripping tools - Tools for preparing high-voltage cables
Hand crimping tools / Crimping and hydraulic cutting tools
General tools
Blue coated tools - Non sparking tools- ATEX equipment - Tools for PE tube preparation
Storage
Electrical safety -LV voltage absence testers - Earthing and low/high-voltage short circuiting - Signing - Measuring devices
Individual protective equipment - Working at height
Mounting, anchoring and connection equipment for overhead low-voltage lines
Installation equipment
Bird protection devices
Insulated tools 1000V CEI-EN 60900
Coated tools for working in an explosive atmosphere ATEX I(II) NF E 74.400
Stripping tools - Tools for preparing hight-voltage cables